8 weeks delivery on averageOwn installation team2-year factory warrantyOwn service team
NL
Long anthracite office unit for placement at an industrial hall Delivery time 8 weeks
Office unit for industrial hall

Office unit for industrial hall

From€ 13,182excl. VAT€ 15,950 incl. VAT

An office unit in or next to your industrial hall gives you extra office space exactly where the need arises: on the shop floor. For a management office, team room, work preparation, planning or a separate meeting spot. You choose from sizes of 5 to 13 metres, from € 15,950 incl. VAT (€ 13,182 excl. VAT). You can see all sizes on price per size.

  • Inside the hall or as an extension outside
  • Sizes of 5 to 13 metres, can be coupled
  • Insulated against noise, dust and cold
  • Average delivery time 8 weeks
  • Free permit advice
Our range

Office units with price

You see every price both incl. and excl. VAT. Choose a unit and it goes straight into your quote request.

5×3 Office Unit Apeldoorn: office unit of 5.2 × 3.2 m, front viewOffice unitBest value

5×3 Office Unit Apeldoorn

  • 5.2 × 3.2 m
  • approx. 17 m²
  • Open workspace
  • Toilet and kitchen optional
  • Double glazing
  • Rc 4.55 · roof Rc 5.56
€ 13,182excl. VAT€ 15,950 incl. VAT
View unit
6×3 Office Unit Amsterdam: office unit of 6.2 × 3.2 m, front viewOffice unitCompact

6×3 Office Unit Amsterdam

  • 6.2 × 3.2 m
  • approx. 20 m²
  • Open workspace
  • Toilet and kitchen optional
  • Double glazing
  • Rc 4.55 · roof Rc 5.56
€ 15,661excl. VAT€ 18,950 incl. VAT
View unit
7×3 Office Unit Alkmaar: office unit of 7.2 × 3.2 m, front viewOffice unitHome office

7×3 Office Unit Alkmaar

  • 7.2 × 3.2 m
  • approx. 23 m²
  • Open workspace
  • Toilet and kitchen optional
  • Double glazing
  • Rc 4.55 · roof Rc 5.56
€ 16,488excl. VAT€ 19,950 incl. VAT
View unit
8×3 Office Unit Den Haag: office unit of 8.2 × 3.2 m, front viewOffice unitPopular

8×3 Office Unit Den Haag

  • 8.2 × 3.2 m
  • approx. 26 m²
  • Open workspace
  • Toilet and kitchen optional
  • Double glazing
  • Rc 4.55 · roof Rc 5.56
€ 17,314excl. VAT€ 20,950 incl. VAT
View unit
9×3 Office Unit Utrecht: office unit of 9.2 × 3.2 m, front viewOffice unitSpacious office

9×3 Office Unit Utrecht

  • 9.2 × 3.2 m
  • approx. 29 m²
  • Open workspace
  • Toilet and kitchen optional
  • Double glazing
  • Rc 4.55 · roof Rc 5.56
€ 18,967excl. VAT€ 22,950 incl. VAT
View unit
10×3 Office Unit Eindhoven: office unit of 10.2 × 3.2 m, front viewOffice unitPopular

10×3 Office Unit Eindhoven

  • 10.2 × 3.2 m
  • approx. 33 m²
  • Open workspace
  • Toilet and kitchen optional
  • Double glazing
  • Rc 4.55 · roof Rc 5.56
€ 20,620excl. VAT€ 24,950 incl. VAT
View unit
11×3 Office Unit Tilburg: office unit of 11.2 × 3.2 m, front viewOffice unitTeam office

11×3 Office Unit Tilburg

  • 11.2 × 3.2 m
  • approx. 36 m²
  • Open workspace
  • Toilet and kitchen optional
  • Double glazing
  • Rc 4.55 · roof Rc 5.56
€ 22,273excl. VAT€ 26,950 incl. VAT
View unit
12×3 Office Unit Almere: office unit of 12.2 × 3.2 m, front viewOffice unitLarge office

12×3 Office Unit Almere

  • 12.2 × 3.2 m
  • approx. 39 m²
  • Open workspace
  • Toilet and kitchen optional
  • Double glazing
  • Rc 4.55 · roof Rc 5.56
€ 23,926excl. VAT€ 28,950 incl. VAT
View unit
13×3 Office Unit Breda: office unit of 13.2 × 3.2 m, front viewOffice unitPopular

13×3 Office Unit Breda

  • 13.2 × 3.2 m
  • approx. 42 m²
  • Open workspace
  • Toilet and kitchen optional
  • Double glazing
  • Rc 4.55 · roof Rc 5.56
€ 27,231excl. VAT€ 32,950 incl. VAT
View unit
10×6 Office Unit Nijmegen: office unit of 10.2 × 6.4 m, front viewOffice unitDouble-wide

10×6 Office Unit Nijmegen

  • 10.2 × 6.4 m
  • approx. 65 m²
  • Open workspace
  • Toilet and kitchen optional
  • Double glazing
  • Rc 4.55 · roof Rc 5.56
€ 43,760excl. VAT€ 52,950 incl. VAT
View unit
13×6 Office Unit Connect: office unit of 13.2 × 6.4 m, front viewOffice unitOn request

13×6 Office Unit Connect

  • 13.2 × 6.4 m
  • approx. 84 m²
  • Connect
  • Toilet and kitchen optional
  • Double glazing
  • Rc 4.55 · roof Rc 5.56
€ 56,983excl. VAT€ 68,950 incl. VAT
View unit

Photos are for illustration. The units shown may include extras beyond the standard price.

Table of contents
  1. Office solutions in and around industrial halls
  2. In the hall or next to it?
  3. Dimensions and custom options
  4. Resistant to industrial use
  5. From design to installation: everything under one roof
  6. Specifications and features
  7. Permit and fire safety
  8. Energy obligations for an office in or at the hall
  9. What does an office unit for an industrial hall cost?

Office solutions in and around industrial halls

An office unit for an industrial hall is a modular, relocatable workspace that you place inside or directly next to an existing hall. Voordeelunits supplies a versatile range for temporary and permanent applications. Manufacturing companies, logistics service providers and storage facilities use our units when they quickly need extra office space in or next to their hall.

Whether it is a management office, team room, work preparation room, canteen or a separate meeting spot in the hall: the units are supplied made to measure and can be used immediately after installation in an industrial environment.

Our office units for industrial halls are:

  • flexible in use and quick to deliver, with an average delivery time of 8 weeks;
  • fully customisable with heating, air conditioning and electrical facilities;
  • suitable for placing inside existing halls or as an extension outside;
  • sustainably built with sturdy materials and a robust finish;
  • modularly expandable with multiple rooms.

In the hall or next to it?

In the hallNext to the hall
AdvantageShort walk to the shop floor, view of production or warehouse, no foundation needed outsideNo floor space lost in the hall, own entrance, daylight all around
Watch out forClear height and door opening of the hall, load-bearing capacity of the floor, escape routes and fire compartmentsFoundation, accessibility for crane and lorry, permit for a building outside
InstallationWith forklift or crane, through the hall doorWith a crane from the lorry

A unit is 3.2 metres wide and 2.88 metres high. When placing it in the hall, check that the door and the clear height are sufficient, including the room needed to drive the unit inside. Also read creating office space next to production halls and office unit as an extension of a warehouse.

Office unit being unloaded from a low-loader with a crane at an industrial hall
Office unit being unloaded from a low-loader with a crane at an industrial hall

Dimensions and custom options

An office unit is delivered as an empty, open workspace. You decide the position of windows, doors and facilities such as electrics, thermostat, sanitary facilities and double glazing. Toilet and kitchen unit are optional.

SizeSuitable forPrice
6.2 × 3.2 mPlanner, work preparer or gatekeeper€ 18,950 incl. VAT (€ 15,661 excl. VAT)
8.2 × 3.2 mManagement office or 2 to 3 workstations€ 20,950 incl. VAT (€ 17,314 excl. VAT)
10.2 × 3.2 mTeam room or canteen€ 24,950 incl. VAT (€ 20,620 excl. VAT)
13.2 × 3.2 mOffice with meeting room and toilet€ 32,950 incl. VAT (€ 27,231 excl. VAT)
13.2 × 6.4 m ConnectComplete office for a team€ 68,950 incl. VAT

More sizes and a custom layout can be found in the 3D configurator.

Resistant to industrial use

A shop floor makes different demands than an open-plan office. Our units are robust, sealed against dust and well insulated. Walls and floor have an Rc value of 4.55 and the roof 5.56. That keeps out cold, heat and also the noise of machines and forklifts. With heating, air conditioning and ventilation, the workplace is suitable for a wide range of working conditions, even in an unheated hall.

Want more workstations? Units can be coupled into larger offices. Also read office units with meeting room.

Workstation in an office unit at an industrial hall
Workstation in an office unit at an industrial hall

From design to installation: everything under one roof

With years of experience, Voordeelunits stands for quality, speed and reliability. From technical advice and production to transport and installation: we take the work off your hands. The units are produced in a factory hall of more than 5,000 m², to the Dutch building standard and with ISO 9001 certification.

We also give free advice on the permit application, the foundation and the technical connections, tailored to your business environment. Inside, the unit has all connections ready correctly. Connecting to electricity, water and sewer on site is done by a local specialist. See also connecting electricity to an office unit.

With a crane or forklift, the installation itself is often done within an hour. We coordinate the preparation, such as the foundation and the installations, efficiently with you in advance.

Specifications and features

Facilities, construction and utilities of an office unit.

ComponentSpecification
Smallest size5.2 × 3.2 × 2.88 m (L × W × H), approx. 17 m² gross, weight approx. 2,500 kg
ConstructionSteel frame, designed by our own Dutch structural engineer
WallsEuropanels Pol Therma TS sandwich panels of 100 mm with aluminium finish, outside RAL7016 (anthracite), inside RAL9010 (white); lambda 0.022 W/(m·K), Rc 4.55 m²K/W. Bathroom/toilet room and lowered ceiling finished with SPC; alcoves covered inside in matt black RAL9005
FloorEuropanels Pol Therma TS sandwich panels of 100 mm (Rc 4.55 m²K/W, lambda 0.022 W/(m·K)) with water-resistant aluminium underside in RAL9010; dry screed system: sandwich panel, 18 mm OSB board and glued Tarkett top layer
RoofEuropanels Pol Therma TD sandwich panels of 125 mm (RAL9010) with aluminium finish, lambda 0.018 W/(m·K), Rc 5.56 m²K/W; flat roof with PVC or EPDM top layer and at least 2 roof drains. Optionally a pitched roof without finish
Windows and doorsPVC frames KIMEX Ideal 4000 in RAL7016 inside and outside, double glazing; front door as a framed door with glass infill, solid panel door at the technical room
Toilet room (optional)Wall-hung toilet Schwab Duplo WC 189 in white with concealed cistern and Fabro ARS-0900-0 flush plate, Cersanit Sat 50 washbasin in white ceramic with chrome Fabro tap, mirror 40 × 60 cm with white backing plate; with ventilation and ceiling light
Kitchen (optional)Sink with fountain tap, optionally an instantaneous water heater. If you choose a full kitchen, it is standard anthracite with wood-look finish, with dishwasher, black composite sink and black flexible tap
Climate (optional)Air conditioner that heats and cools (Kaisai KEX-09KTG or Mitsubishi MUZ-HR35VF), installed according to NEN1010 and NEN1814
VentilationAdjustable ventilation openings above the window frames, electric extraction in the toilet room. Optionally mechanical ventilation according to NEN1087 and NPR1088, with air ducts according to the Luka standards if you choose an Itho box
ElectricsFuse box in the technical cabinet (standard 3-phase connection (3 × 25 A)), installation according to NEN1010
Sewer and waterOne central outlet of 110 mm in which all waste water drains come together; to be connected to a (shared) sewer system in the technical room
FoundationFlat, stable surface: concrete foundation, concrete blocks or concrete slabs

Permit and fire safety

A unit inside a hall can also count as a building. Whether you need an environmental permit (omgevingsvergunning) depends on your municipality, the location and the use. Pay attention to these points:

  • Zoning plan (omgevingsplan): does an office function fit on your business premises? An office as a subordinate function at a company is often allowed. More in placing an office unit on an industrial estate.
  • Fire safety: a unit in the hall must not obstruct escape routes, fire compartments and fire-fighting equipment. Municipalities and the fire brigade look at the number of people and the intended use.
  • Outside the hall: a unit as an extension is a building for which a permit is usually required.

Always check with your municipality. Our permit advice is free; having the application handled costs € 795.00 incl. VAT (€ 657 excl. VAT). Also use the free permit check.

Free

Is your unit allowed to stand there?

With the free online permit check you can quickly see what is needed at your location. Permit advice is free; having us handle the application costs € 795.00 incl. VAT (€ 657 excl. VAT).

Do the permit check

Energy obligations for an office in or at the hall

Since 1 January 2023, an office building must have at least energy label C. That obligation does not apply to every office. Exceptions include offices with a usable floor area of less than 100 m², offices that take up less than half of a building (a secondary function, as an office in an industrial hall often is) and office buildings that are used for two years at most. Most standalone office units therefore fall outside the label obligation. If you combine several units into a larger office, have it checked in advance.

Regardless of the obligation, an energy-efficient unit is simply economical. Thanks to the good insulation and an air conditioner with heat pump technology, energy consumption stays low.

What does an office unit for an industrial hall cost?

An office unit is available from € 15,950 incl. VAT (€ 13,182 excl. VAT). A popular 6.2 × 3.2 metre unit costs € 18,950 incl. VAT (€ 15,661 excl. VAT). Extra options and transport vary with the location and the specifications. You tick transport, foundation and installation in the quote request; you receive an indication by email.

Compared with renovating or moving to a larger building, a unit is quick and economical. Also read office unit as an alternative to moving.

What does your unit cost?

Choose a unit and see the price instantly. Tick what else you would like to know and we will email you an indication.

Price with basic layout excl. VAT incl. VAT
2. What else would you like to know or have arranged?

The unit arrives with all internal connections correctly prepared. Connecting to electricity, water and sewer on site is done by a local specialist.

Frequently asked questions

Vragen over office unit for industrial hall

Can't find your question? Call, email or WhatsApp us.

What is an office unit for an industrial hall?

A modular, relocatable workspace that you place inside or directly next to an existing industrial hall. Ideal for office work, meetings, planning or a management office on the shop floor.

What are office units in industrial halls used for?

For management offices, work preparation, meeting rooms, canteens or planners, exactly where the need arises on the shop floor.

What are the dimensions and custom options?

Our office units are available from 5.2 to 13.2 metres long and 3.2 metres wide, for example 6.2 × 3.2 metres, and as a 13.2 × 6.4 metre Connect. You decide the position of windows, doors and facilities such as electrics, thermostat, sanitary facilities or double glazing.

Do I need a permit for an office unit in an industrial hall?

That differs per municipality and depends on the location and the use. Check with your municipality or do the free permit check. Our permit advice is free.

Is the unit resistant to industrial use?

Yes. The units are robust, dust-resistant and well insulated. Options such as heating, air conditioning and ventilation make the workplace suitable for a wide range of working conditions.

How long is the delivery time?

The delivery time is on average 8 weeks after you accept the quote. Get in touch if you want it faster; sometimes that is possible.

What does a standard unit for an industrial hall cost?

An office unit of 6.2 × 3.2 metres costs € 18,950 incl. VAT (€ 15,661 excl. VAT). Extra options and transport vary with the location and the specifications; you tick these in the quote request.

How quickly can I have it installed?

With a crane or forklift, the installation is often done within an hour. We coordinate the preparation, such as foundation and installations, efficiently with you in advance.

Can I move or expand the unit?

Yes. The units are modular, can be coupled and can be moved inside or outside the hall, and are easy to expand. They are intended for occasional relocation, not for driving around like a caravan.

What is an energy obligation for an office/hall?

Since 2023, office buildings must have at least energy label C. Offices smaller than 100 m², offices that take up less than half of a building and offices that are used for two years at most are exempt. A standalone office unit in a hall usually falls under this.

Will an office unit fit through the door of my hall?

A unit is 3.2 metres wide and 2.88 metres high. The hall door and the clear height must be sufficient to bring the unit inside with a forklift or transport vehicle. We are happy to check this with you.

What should I pay attention to regarding fire safety?

A unit in the hall must not obstruct escape routes, fire compartments or fire-fighting equipment. The municipality and fire brigade look at the intended use and the number of people. Discuss this with your municipality in advance.

How is the unit connected to electricity and water?

Inside, the unit has all connections ready correctly. Connecting to electricity, water and sewer on site is done by a local specialist.

Your unit delivered within 8 weeks on average

Request a no-obligation quote or make an appointment at our showroom in Breda.

Quote in 5 steps

Request a no-obligation quote

Tell us what you want to use the unit for. You will receive a tailor-made quote.

  1. 1Purpose
  2. 2Type of unit
  3. 3Size
  4. 4Wishes
  5. 5Details
What do you want to use the unit for?
Make an appointment

Schedule an appointment

The appointment is in our showroom: Hazepad 20, 4825 AV Breda.

Do you already have a location for the unit?
Hazepad 20, 4825 AV Breda Plan your route
SIP panel home

Price indication per m²

A SIP panel home is a complete house, built modularly built from SIP panels. Choose the floor area and see the price of the home instantly.

SIP panel home price € 117,000 excl. VAT € 141,570 incl. VAT From € 2,359.50 per m² incl. VAT (€ 1,950 per m² excl. VAT), 2 or 3 bedrooms. Transport, foundation and installation come on top.